Ma'aunin Kauri na Batirin PPG da hannu (Allon Taɓawa) PPG-20153M-2000g
Gabatar da kayan aiki a takaice
Wannan kayan aiki yana shawo kan matsalolin matsin lamba mara ƙarfi, daidaita daidaiton daidaituwar ƙashin baya, ƙarancin tsayin aunawa, daidaiton aunawa mara ƙarfi, da sauransu yayin auna kauri na batirin da ke da laushi a kasuwa.
Wannan kayan aiki yana da saurin aunawa da sauri, matsin lamba mai karko, da kuma ƙimar matsin lamba mai daidaitawa, wanda ke inganta daidaito da kwanciyar hankali na aunawa sosai, kuma yana inganta ingancin aunawa sosai.
Sigogi na fasaha na kayan aiki
| S / N | aikin | Saita |
| 1 | Gwada yanki mai tasiri | L 200mm × W 150mm |
| 2 | Gwajin kauri kewayon | 0~50mm |
| 3 | Tsayin sararin gwaji | ≥50mm |
| 4 | Matsakaicin ƙuduri | 0 001mm |
| 5 | Kuskuren auna maki ɗaya | 0.005mm |
| 6 | Haɗe da kuskuren aunawa | ≤0.01mm |
| 7 | Gwada kewayon matsin lamba | 500~2000g ±10% |
| 8 | Yanayin watsa matsi | Nauyin nauyi / daidaitawa da hannu |
| 9 | Tsarin bayanai | Allon nuni na dijital + firikwensin (ma'aunin faci grating) |
| 10 | Yanayin aiki | Zafin jiki: 23℃± 2℃ Danshi: 30~80% |
| Girgizawa: <0.002mm / s, <15Hz | ||
| 11 | Tushe | Ƙarfin wutar lantarki: DC24V |
Matakan aikin kayan aiki
1. Sanya batirin da hannu a kan dandamalin gwajin auna kauri;
2. Ɗaga farantin matsin lamba na gwaji, gwada gwajin matsin lamba na halitta na farantin matsin lamba;
3. Bayan an kammala gwajin, a ɗaga farantin matsin lamba na gwajin;
4. Cire batirin da hannu, kuma an kammala dukkan aikin, sannan a shiga gwaji na gaba;
Babban kayan aikin
1. Na'urar aunawa: ma'aunin grating
2. Nunin bayanai: allon nuni na dijital
3. Fuskage: fesa fenti a saman.
4. Kayan sassan injina: ƙarfe, aji 00 Jinan kore marmara.
5. Murfin aminci na injin: sassan ƙarfe na takarda.
